Barcode Printer Setup Method Label Printer Setup Installation Tutorial

Barcode Printer Setup Method Label Printer Setup Installation Tutorial

first step:

When we get a label printer, the necessary operation is to install the power supply, data cable and consumables. Although simple, users will forget about it in practice.

The second step:

Calibrating the paper, this operation is to enable the label printer to properly identify the label, ensuring that the label can be accurately transported during printing to avoid waste.

third step:

After the most basic operation is completed, it is also necessary to set the working mode of the label printer according to our usage requirements. For example: “Is printing a thermal label, or a thermal transfer label?”, “Is it necessary to tear the paper after printing? Cut the paper? Or peel the paper?”, etc., all need to be set in the label printer. Can be achieved. To set these functions, the user needs to make settings through the operation panel and LCD menu before printing, find the corresponding function and select, simple and fast. The label printer's LCD menu setting function is very complete, including: print blackness, speed, interface language, printing mode, tearing mode, paper cutting mode, stripping mode, detection mode, serial rate, check digit, data bit , date and time, network port, default gateway, IP address, subnet mask, probe length, offline printing, and tearing, positioning, paper cutting, peeling offset adjustment, print content level, vertical offset adjustment...

the fourth step:

The settings on the computer side mainly include the settings of the driver and printing software. Again, these are all based on the actual situation of the user. Users often ask: "How should my label size be set?" "How much print blackness should I set?" "How to design the label layout I need" and other similar issues that can be set in the software section.

Key steps to set:

1 type of tag;

These include: labels that are positioned at a pitch, labels that are positioned with a black mark, labels that are positioned with a round hole, or continuous paper that can be set in the drive.

2 label actual size;

Use a ruler to measure the height and width of the actual label and set it in the appropriate position of the software (note: height filling errors can easily lead to interlaced printing). At the same time, if the label is multi-row and multi-column, you also need to fill in the label height in the number of rows and columns in the software.

3 label material;

Depending on the material of the label, the user needs to select the matching ribbon for printing. The blackness setting of the printing also needs to be adjusted accordingly. For details, please consult the local consumables sales point.

Precautions

After completing the above four steps, the user can start to design according to the label content and typesetting needs of the user, which is generally designed in the printing software that comes with the label printer.