The control process of pharmaceutical production is very strict. It is different from the quality management of general commodity production, because the quality of the drug will involve the life safety of the patient. Therefore, strict quality management runs through the entire drug production process. The same is true for packaging equipment. This article mainly discusses the aspects of the quality of pharmaceutical packaging equipment for large infusion of soft bags, and puts forward relevant suggestions.
Traditional infusion glass bottles have the disadvantages of heavy weight, brittleness, and dissolution of inorganic substances. That is, the soft bag large infusion has the advantages of light weight, small volume, good air tightness, good impact resistance, high transparency, and no need to enter the needle tube during clinical infusion. At present, soft bag products are widely used due to their humanized design.
The packaging equipment will have an impact on the quality of the product. The affected parts of the packaging equipment may have the following factors: unqualified printing; unqualified bag making; unqualified loading; unqualified sealing.
We need to carry out regular maintenance on packaging equipment, and timely replace the aging packaging equipment; strictly carry out pre-production process verification, and strictly verify the packaging equipment parameters of each manufacturer to ensure that the process parameters can be selected in production. Correct, reduce waste of materials, reduce production costs, improve product qualification rate; if you encounter the above problems in production, you must stop production immediately to avoid unnecessary waste, and professional maintenance personnel to carry out equipment maintenance and solve problems.
When the leakage of the interface of the packaging equipment is not firmly formed, the interface which occurs when the bag is unqualified is the same as the leakage phenomenon of the film welding, and the problem is not immediately found in the production.
It is necessary to regularly inspect the packaging equipment. In the long-term production, the accuracy of the equipment caused by long-term production is reduced, and the components of the equipment are loosely fixed. This should be promptly found and solved in time; for some packaging equipment problems, it must be Manufacturers require professionals to carry out repairs.
Article source address: http://
3D Panel Fence
3D Wire Fence Introduction:
- 3D Wire Fence is also called the Curved Wire Mesh fence. This is a new type of fencing, which is mainly popular in developed countries such as the United States, Japan, Korea, and so on. The 3d fence has the characteristics of beautiful appearance, no limitation of terrain fluctuation and convenient installation.
- 3D Wire Fence is wide used for Garden, factory, road, highway, public buildings, parks, government buildings, ball court, industry & commercial sector and so on.
Location:
Anping County Shengxin Metal Products Co.,Ltd is located in the hometown of Wire Mesh - Anping County,Hebei Province,China.
Established: 1992
Certificates: CE certificate, ISO9001:2015 certificate, BV certificate
Annual Revenue: over US$ 12,000,000.00
3D Panel Fence,3D Wire Fence Panels,Pvc Coated 3D Fence,Welded Wire Mesh 3D Fence
Anping County Shengxin Metal Products Co., Ltd , https://www.shengxin-fence.com