Four types of household products, such as children's furniture, are listed as the national key supervision spot checks in 2016.

Recently, the AQSIQ website announced the 2016 National Product Supervision and Inspection Plan Announcement. The announcement shows that in 2016, including children's furniture, soft sofas, air purifiers, electric water heaters, ceramic tiles, ceramic toilets, ceramic tiles. At least forty kinds of home building materials products in four major categories, such as sealing faucets, will become the focus of national supervision and spot checks this year.

According to the "2016 National Product Supervision and Inspection Plan for Product Quality", the supervision and spot checks are divided into three types: quarterly supervision and spot check, special supervision and spot check, and joint supervision and spot check. The targets for supervision and spot check include production enterprises, distribution enterprises and network sales enterprises. While planning to conduct national supervision and spot checks on the above 170 products, the General Administration of Quality Supervision, Inspection and Quarantine will also organize special supervision and spot checks on unplanned products according to the needs of the work.

Among them, in the decoration and decoration materials, ceramic tiles, ceramic toilets, shower showers, face washers, bathtubs, ceramic sealing faucets, laminate flooring, waterproof coatings, etc. have also become the focus of spot checks.

Every year, the AQSIQ product quality spot check will become the focus of the industry and major media, and it will become an important reference for consumers to buy and use. In recent years, the quality of China's ceramic tile products has continued to improve, and the product qualification rate has further increased. The qualification rate of “National Pumping” quality inspection has stabilized at over 90%. At present, the results of the quality inspection of ceramic tile sampling in 2015 have not yet been fully released. However, from the results of the random inspections reported by various localities, there are still many problems, and further improvement is urgently needed.

Published: April 20, 2015

Issued by: Xi'an Quality and Technical Supervision Bureau

Sampling results: 1 batch of product size failed

On April 20, 2015, Xi'an Quality and Technical Supervision Bureau reported the results of product quality supervision and inspection in the first quarter of 2015 on its official website. Among them, the qualified rate of ceramic tile products is 96.7%.

A total of 30 batches of ceramic tiles were sampled, and the inspection items included five indicators: size, water absorption, failure strength, modulus of rupture, and radionuclide limit. The inspection agency is Xi'an Product Quality Supervision and Inspection Institute. After inspection, the batch size of the product was unqualified. The main reason for the size failure is that the production and production process is backward, the quality management is not strict, and the quality assurance capability is lacking. If the dimensional deviation is unqualified, the gap between the tiles will be irregular, which will affect the quality and appearance of the decoration.

Release time: July 20, 2015

Issued by: Guangdong Provincial Bureau of Quality and Technical Supervision

Sampling results: 24 batches of ceramic tiles failed

This time, 140 batches of ceramic tiles produced by 126 enterprises in 9 cities including Zhuhai, Foshan, Jiangmen, Zhaoqing, Huizhou, Dongguan, Qingyuan, Heyuan and Yunfu were randomly selected. According to GB/T 4100-2006 "ceramic tiles" and GB 6566-2010 "Limits of Radionuclides for Building Materials", GB/T 23458-2009 "Ceramic Tiles for Squares", GB/T 13891-2008 "Method for Measuring Mirror Gloss of Architectural Finishing Materials", and the current effective enterprises for filing Standard and product express quality requirements for surface quality, size, water absorption, fracture strength, modulus of rupture, glaze crack resistance, stain resistance, chemical resistance, wear resistance of non-glazed tiles, gloss, Twelve items such as radionuclides and signs were tested.

After inspection, 24 batches were found to be unqualified, and the rate of unqualified products was 17.1%. Excluding only 16 batches of unqualified products, the product quality of unqualified products was 5.7%. Major unqualified items relate to marking, failure strength, size, modulus of rupture and water absorption.

Published: July 22, 2015

Issued by: Shaanxi Provincial Bureau of Quality and Technical Supervision

Sampling results: 5 batches of ceramic tile products do not meet the standard requirements

In the second quarter of 2015, Shaanxi Provincial Bureau of Quality and Technical Supervision randomly selected 40 batches of ceramic tile products from 40 production and distribution enterprises in Xi'an, Xianyang, Baoji, Weinan and Tongchuan areas. After inspection, 35 batches of qualified products were comprehensively tested.

This spot check is based on GB/T 4100-2006 "ceramic tiles", GB/T 3810.1 ~ 16-2006 "ceramic brick test methods", GB 6566-2010 "Building materials radionuclide limited" and other related standards, ceramic tile products The dimensions, water absorption, failure strength, modulus of rupture, wear resistance of glazed tiles, glaze crack resistance, chemical corrosion resistance, pollution resistance, and radionuclide projects were examined.

The spot check found that 5 batches of products did not meet the standard requirements, and the dimensions, water absorption, failure strength, and modulus of fracture of the ceramic tile products were unqualified.

Release time: September 8, 2015

Release unit: Liaoning Quality and Technical Supervision Bureau

Sampling results: 5 batches of 5 companies do not meet the standard requirements

In the second quarter of 2015, Liaoning Quality and Technical Supervision Bureau conducted a supervision and spot check on the quality of ceramic tile products produced in Liaoning Province. A total of 40 batches were randomly selected and failed.

This supervision and spot check is based on GB/T4100-2006 "ceramic tiles", GB/T3810.1 ~ 16-2006 "ceramic brick test methods", GB6566-2010 "Building materials radionuclide limited edition" and other national standards and related requirements, The following items of the product were tested: size, water absorption, modulus of rupture, breaking strength, depth of wear resistance, glaze resistance, chemical resistance, pollution resistance, radionuclide limit, and 2 batches of products were found. Does not meet the standard requirements, involving damage strength, modulus of rupture items.

Published: October 2015

Issued by: Henan Quality and Technical Supervision Bureau

Sampling results: 4 batches of ceramic tile products do not meet the standard requirements

In the first quarter of 2015, the Henan Provincial Bureau of Quality and Technical Supervision conducted provincial supervision and spot checks on the quality of five kinds of products, including ceramic tiles, and extracted Zhengzhou, Xinxiang, Xuchang, Xinyang, Nanyang, Pingdingshan, Luoyang, Anyang, Hebi and Zhangzhou. 87 batches of ceramic tile products produced by 51 enterprises in 7 provincial cities and 51 provinces directly under the jurisdiction of counties (cities).

After sampling, 83 batches of products meet the standard requirements, and 4 batches of products do not meet the standard requirements, involving items such as size and damage strength.

Release time: October 10, 2015

Issued by: Fujian Provincial Bureau of Quality and Technical Supervision

Sampling results: 29 batches of 25 ceramic enterprises failed

In the second quarter of 2015, the Fujian Provincial Quality Supervision Bureau conducted provincial-level supervision and spot checks on 86 industrial products produced by enterprises in the province. For the safety performance and performance performance of the products, a total of 2,748 batches of 2,425 production enterprises were selected and qualified. The rate is 93.12%. However, some industrial products still have some quality problems. The pass rate of six kinds of products such as detergent for tableware (including fruits and vegetables), glass fiber water pipes, ceramic tiles, umbrellas, leather and ceramic sheets is less than 80.00%.

Among them, 29 batches of ceramic tiles have failed in 29 batches, mainly involving the size, water absorption, failure strength and modulus of fracture of ceramic tile products.

Release time: November 25, 2015

Issued by: Shenyang Quality and Technical Supervision Bureau

Sampling results: 1 batch of ceramic tile failure strength project failed

On November 25, 2015, Shenyang Municipal Bureau of Quality and Technical Supervision released the 19th issue of Shenyang City Ceramic Tile Product Quality Supervision and Inspection Report on its official website, supervising and inspecting 50 batches of products produced by 26 ceramic tile manufacturers in Shenyang, qualified 49 batches. The pass rate was 98%.

This supervision and spot check is carried out according to the “2015 Shenyang Ceramic Tile Product Quality Supervision and Inspection Plan”, according to GB/T4100-2006 “Ceramic Tiles”, GB6566-2010 “Building Materials Radionuclide Limits” and the quality requirements of the products. Items such as deviation, surface quality, water absorption, failure strength, modulus of rupture, and radionuclide were examined.

In this spot check, a batch of 300mm×450mm “Yi Jiasi” ceramic interior wall tiles of Shenyang Power Ceramics Co., Ltd. was found to be unsatisfactory.

Published: November 27, 2015

Release unit: Guizhou Provincial Bureau of Quality and Technical Supervision

Sampling results: problem product detection rate 12.5%

On November 27, 2015, the Guizhou Provincial Bureau of Quality and Technical Supervision announced the results of the quality supervision and inspection of ceramic tile products in 2015 on its official website, and randomly selected 8 batches of ceramic tile products produced by 7 enterprises in Guiyang, Zunyi and Qiandongnan. The product inspection of one batch of one company was unqualified, the detection rate of the problem product was 12.5%, and the problem rate of the problem enterprise was 14.3%.

According to GB/T4100-2006 "ceramic tiles", GB6566-2010 "Building materials radionuclide limited" and other standards, the size, water absorption, failure strength, modulus of rupture, glazed brick glaze resistance of ceramic tiles Cracking, stain resistance, chemical resistance, and radioactive projects were tested. The unqualified items are mainly water absorption rate, failure strength and breaking load. (Source: Ceramic Information)