Detailed plastic tennis court construction process (Photos)

Plastic Tennis Court:

The base layer of the plastic tennis court is a rectangular solid plane composed of polyurethane prepolymer, mixed polyether, waste tire rubber, EPDM rubber particles or PU particles, pigments, additives and fillers. Plastic tennis courts have the characteristics of good flatness, high compressive strength, proper hardness and elasticity, and stable physical properties, which are beneficial to the athletes' speed and technology, and effectively improve the performance of sports and reduce the fall rate. Plastic tennis court is composed of polyurethane rubber and other materials. It has certain elasticity and color. It has certain anti-ultraviolet capacity and aging resistance. It is internationally recognized as the best all-weather indoor and outdoor sports venue floor material.

The main materials of the plastic tennis court: Two-component polyurethane slurry, one-component polyurethane Glue, PU particles, silicon PU particles, EDPM particles, black waste tire particles.

A good tennis court can provide you with long-term sports fun, but the prerequisite is that the design is reasonable, in line with the actual situation, and the quality of materials and construction is guaranteed. According to the "Tennis Competition Rules" promulgated by the International Network Association and the State Sports Commission, a standard tennis court covers an area of ​​not less than 36.58 meters (length) x 18.29 meters (width), which is also a standard tennis court surrounded by screens or indoor. The net size of the interior wall of the building. In this area, the standard size of an effective doubles field is: 23.774 meters (long) and 10.973 meters (wide). There should be more than 6.40 meters free space after each end line. There should be free space outside each edge line. Not less than 3.66 meters. The net column was installed in the center of the court. The center of the two columns was measured. The distance between the columns was 12.80 meters. The top of the net column was 1.07 meters away from the ground plane. The center of the net was 0.914 meters above the ground plane.

Lighting system: design and use of tennis court fixtures, uniform brightness, no light and shadow drag; long life, easy to replace; after installation to achieve the ratio of the maximum and minimum value of the site light brightness is less than 2:1 requirements.

Windbreak: Product series: 80% shelter rate, 70% shelter rate, 60% shelter rate, 50% shelter rate

Tennis Equipment: The use of Canada's COURT-1 tennis court equipment was selected for many famous venues because of its excellent quality.

Seine system: Responsible for the seine network project, using spray or plastic hook chain network, this type of protection network has the characteristics of anti-rust, long life, beautiful appearance, strong and durable.

PU plastic stadium construction instructions:

The main raw material for all-plastic stadiums is paving materials, but because it is a cast-formed product, the requirements for the foundation and the construction process are very strict. The following points should be noted when using our products:

1. Asphalt concrete or cement concrete can be used for foundation paving and require certain strength and stability (cement concrete foundation needs to cut expansion joints and must be waterproof layer).

2. The base is strictly prohibited from cracks and uneven frost heave caused by freezing.

3, the foundation must have a good level of flatness.

4. The surface must be flat to ensure drainage.

5. The basic surface must be kept clean and dry. After the foundation is completed, the warranty period of 21 days or more is strictly required.

PU塑胶球场施工PU塑胶球场施工PU塑胶球场施工PU塑胶球场施工

Crayon

Jumbo Crayons, Multi Color Crayons, Kids Crayons, Baby Crayons

Ningbo Hollan Stationery Co.,Ltd. , https://www.hollanstationery.com