The image above shows the differences between water jacket and gas jacket COâ‚‚ incubators. A water jacket incubator uses a separate water-filled chamber surrounding the inner working chamber to maintain a stable temperature. This system is known for its excellent thermal insulation properties. In case of a power outage, the water jacket can retain heat for an extended period, ensuring that the internal temperature remains stable. This makes it ideal for experiments requiring long-term, consistent conditions, especially in environments where power supply may be unreliable.
On the other hand, a gas jacket incubator heats the inner chamber directly through heating elements located in the outer gas jacket. This method is often referred to as "six-sided direct heating" and offers faster warming up and quicker recovery after door openings. It is particularly suitable for short-term cultures or when frequent access to the incubator is required. Additionally, the gas jacket design is simpler and easier to maintain compared to the water jacket system.
Maintaining a stable temperature inside a COâ‚‚ incubator is crucial for healthy cell growth. Therefore, a reliable and accurate temperature control system is essential. To ensure more stability, it's recommended to choose a COâ‚‚ incubator with triple temperature control: internal temperature regulation, over-temperature alarm, and ambient temperature monitoring.
**Usage Tips:**
1. Always close the incubator door securely to prevent gas leakage and ensure accurate test results.
2. After the refrigeration system stops, wipe the interior chamber and observation window with a soft cloth.
3. Before turning off the incubator, make sure all control switches are in the off position and the power is disconnected.
4. Place the incubator on a flat, clean surface in a dry and well-ventilated area.
5. Avoid adjusting the gas inflow pressure too high, as this could damage the system or cause leaks.
6. Before starting, ensure all control switches are in the non-operational position and the speed control knob is set to minimum.
7. Regular maintenance and proper usage can significantly extend the lifespan of the incubator.
8. Do not use the incubator for materials containing volatile solvents, low-concentration explosive gases, or toxic substances.
9. Keep the air inside the incubator clean and disinfect regularly. Monitor the distilled water level in the tank to maintain proper humidity and prevent evaporation of culture media.
10. During continuous operation, inspect the incubator every three months. Check for dust or debris around the motor and refrigeration components, clean the compressor and condenser, and check fuses, control parts, and fastening screws.
Shanghai Xinzhuang Experimental Instrument Co., Ltd. specializes in manufacturing a wide range of lab equipment, including constant temperature shakers, low-temperature water baths, water bath oscillators, gas bath oscillators, incubators, and more. With strong technical capabilities and leading performance indicators, the company has earned a solid reputation in the industry. For more information or inquiries, visit their official website.
Best High Chair,Portable High Chair,High Chair,Wooden High Chair
NINGBO BABY FIRST BABY PRODUCTS CO.,LTD. , https://www.maxinfglobal.com