[Office Partner Information Center] On the occasion of the 2009 China Pen Association Ball Pen Professional Committee and the Joint Meeting of Raw Materials, Parts and Equipment Committees, it was entrusted by the National Pen Standardization Technical Committee Secretariat to make industry standard revisions to the meeting. report.
2009 is a crucial year to deal with the serious difficulties and severe challenges brought about by the global financial crisis, and it is also the first year of the comprehensive work of the Pen Standards Committee. In order to do a good job in the standardization of the pen industry, the Pen Standards Committee will study and practice the scientific concept of development, actively organize the implementation and implementation of the annual plan, and continue to play a technical support role for the development of the standardization work in order to continue to promote the industry. Make a contribution to rapid development.
(1) Standard status of the pen industry
By the end of 2009, there were 19 industry standards in the pen industry, including 14 product standards and 5 terminology standards. The standard content covers the main products such as fountain pens, ballpoint pens and pencils in the industry, which basically meet the needs of the development of the industry. Currently, six national standards are being submitted for approval, and one national standard and nine industry standards are being revised. Through the standard revision, the "Ink Ballpoint Pen and Refill" national standard (reported for approval) and the revised "Neutral Ink Ballpoint Pen and Refill" industry standards are revised to adopt international standards; "The fountain pen and its nib" and "Micro The national standard (reported for approval) of the pen pen ink pen was revised to adopt advanced foreign standards, and at the same time, some standard ageing standards were revised through standard review work. Through the above work, the standard level of the industry has been improved, the technical requirements and test methods have been improved and supplemented, and the standardization work is developing from pen products to pen sets of inks and parts, which will provide more powerful development for the industry. Technical Support.
(II) Overall situation of standardization work in 2009
1. Completion of standard revision
According to the standardization development plan for the pen industry during the “Eleventh Five-Year Plan†period, in addition to pen products, pen-compatible inks and parts have been included in the key areas of standardization work. In recent years, the development of marker pen products has been very rapid. In order to cope with the development of such products, the organization has formulated standards for supporting inks and parts to guide the production of related products, strengthen quality management, further improve the quality level of products, and change the standard lag. In the situation of product development. According to the China National Light Industry Association's industry standard plan project, the Pen Standards Committee revised and revised nine industry standards in 2009, which are summarized as: a pen (neutral ink ballpoint pen and refill), three parts (fiber pen tip, fiber) Water storage core, micro-hole pen), five kinds of ink (oil for ink marker, ink for micro-hole pen, ink for whiteboard marker, ink for fluorescent marker, ink for fountain pen). In addition to the neutral ink ballpoint pen and refill and fountain pen ink for the revised project, all other projects are formulated.
After the above-mentioned projects were launched, the Pen Standards Committee held a standard revision and revision work meeting, implemented the standard responsible units, set up a standard drafting working group, and conducted group discussions according to the working group, which made a useful discussion on related issues. In the drafting and commenting stage of the standard, the Standardization Committee gives business guidance to the drafting unit responsible for each standard to ensure that the technical content, writing format and text quality of the standard meet the requirements. After the completion of the standard consultation draft, the Pen Standard Committee organized a standard for comments. At present, four standards have entered the stage of solicitation of comments (second draft), and five standards have entered the review stage, and they have begun to organize standard review meetings, and strive to complete the approval of all standards at the beginning of next year.
In 2009, the Pen Standards Committee revised the standards according to the revision opinions put forward by the five national standards such as the “Water Fountain Pen and Its Tip†proposed by the review department of the National Standards Committee, and completed the review of the standards. Organized the review of the "Standard-type fountain pen" and "micro-hole ink pen" national standards (review) in 2008, in which the "micro-porous ink pen" national standard has been approved after review; "direct liquid type The national standard of the fountain pen failed to pass the review, and the draft for review is still being revised.
2. Formulation of standards with independent intellectual property rights
The above national standards and industry standards, in addition to neutral ink ballpoint pens and fountain pens have international standards and foreign advanced standards, pen ink and parts standards are industry independent research and development, standard technical requirements and test methods in the industry quality technical requirements Improve and combine with enterprise standard technology.
3. Light industry industry revitalization planning standards supporting situation
Focusing on the revitalization plan of the light industry, the Pen Standards Committee has two national standards including “National Pen and Pen Tip†and seven industry standards such as “Neutral Ink Ballpoint Pen and Refill†and “Water-Soluble Colored Pencil†( To be filed) to declare.
(III) Key points of work in 2010
1. The main goal of standardization work
(1) Actively carry out research on standard topics, increase the innovation of standards; establish a standard system for the pen industry to ensure the sustainable development of industry standardization work.
(2) Do a good job in the organization of the industry standard for the formulation of water-soluble colored pencils that have been declared.
(3) Do a good job in the declaration of industry standards such as "Pencil Pencil" and "Neutral Ink".
(4) Implementing the requirements of the National Standards Committee on Implementing the Notice of GB/T 1.1-2009 "Standardization Work Guidelines Part 1: Standard Structure and Compilation", in-depth study of GB/1.1-2009 and the previous version The main technical changes, according to the requirements of GB/T 1.1-2009 preparation of national standards, industry standards.
The new version of GB/T 1.1 will be implemented on January 1, 2010. With the agreement of the China National Light Industry Council, this year's industry standards will be drafted and approved for use in the new GB/T 1.1 rules.
(5) Increase the publicity of pen-making national standards and industry standards, and actively promote implementation.
(4) Suggestions for standardization work
The professional committee and the pen marking committee are the technical work organizations under the leadership of the China Pen Association. They should give full play to the role of the "two sessions" and promote the development of industry standardization work.
1. It is necessary to take the standardization work as a key task and play the role of the "Technology Development Forum" of the professional committee. Research and develop a standardization work plan in this field, study the standards required for products, and establish the development direction of standardization work.
2. Analyze and research key products in this field, do standard research work in advance, and consider the possibility of proposing new work items.
3. Actively participate in the standardization activities of the industry, participate in the revision and revision of industry standards, propose amendments to the standard drafts, and assume greater responsibility in standardization work.
4. Study the implementation plan of the standard, organize the implementation of the standard, and feedback the problems arising in the implementation of the standard to the Pen Standard Committee and propose amendments.
5. Organize the standardization and training of standards, popularize standardized knowledge, and improve the standardization level and the quality of standardization personnel.
With the continuous development of the reform of standardization work, the standard revision and revision work and the technical level of the standard have changed a lot. The standardization work has received unprecedented attention and support from various enterprise units in the industry, and the status of standardization work has been upgraded to an unprecedented level. height. Let us work together under the leadership of the China Pen Association to create a new situation in the industry standardization work.
The size of the fabric Sleeper is small which takes less space and easy to move. You can have a fabric sleeper at your office which is more comfortable for lunch break. And you can use it as a sofa at office time. The fabric sleeper sofa is also easy to intall. There are different types of fabric sleeper, you can choose the fabric sleeper suitable for you.
Fabric Sleeper,Chaise Lounge Sofa Chair,Fabric Chaise Lounge Sofa,Fabric Chaise Lounge Chair
Kaifeng Lanwei Smart Home Co., Ltd , https://www.sofa-recliner.com