Wooden doors, as the name suggests, are wooden doors. It can be divided into many types according to materials, processes and uses. Widely used in civil and commercial buildings and residential buildings.
Beautiful appearance
The surface paint film of wooden doors and windows should be smooth and bright, without quality defects such as falling, bubbles and wrinkles, without corrosion points, dead knots and disability; the wood used for the door and window cover should be coordinated with the wood and color of the door and window sash, and the veneer and The color difference of the wood lines cannot be large, and the tree species should be the same.
Door and window fan to be square
Can not be warped and deformed, the door and window sash can just be inserted into the door and window frame and match the door and window frame: if the door and window fan and the frame are large, mainly because the planing is not correct during the installation or the door and window frame is not perpendicular to the ground, the door and window can be The fan is removed and re-planed; if the door and window frames are not vertical, the gasket should be straightened in the frame.
The hinge should be positioned accurately
Firmly installed: If the hinge is not upright, the door and window fans will not match the frame, and the door and window switches will not be smooth. You can unscrew one screw for each hinge first, then adjust the fit of the door and window to the frame, and then tighten all the screws after the adjustment is correct. If the hinge screw is short, or when the screw is screwed in, the screw is not twisted, or the screw is twisted, the door and window fans will be strolled. The appropriate screws should be replaced. The screws must be straight when they are screwed. The screws should be nailed into 1/3 first, and the rest should be screwed in.
The opening and locking of the door lock should be smooth
The two parts of the lock on the door leaf and the door frame should be matched: the lock is not properly installed, which will cause the door leaf switch to be uncomfortable.
There should be a base material in the door and window cover
When the window cover is made of blockboard or MDF, the base plate should be fixed on the base keel of the window frame and then nailed; the door cover should be framed with wood, planed and straightened, and then assembled and mounted on the wall. Body, then cover the base board and veneer. Tap the side panel of the door and window cover by hand. If an empty drum sounds, it means that there is no base board such as a blockboard on the bottom layer, which should be removed and redone.
Document.body.oncopy = function () { setTimeout( function () { var text = clipboardData.getData("text"); if (text) { text = text + " This article comes from China Wooden Door Network, China's well-known wooden door industry portal Website! (http://) Detailed reference: "+location.href; clipboardData.setData("text", text); } }, 100) }Mobile Type LED Operating Light
Germany imported beads
Imported French lens
mould Die-casting Eight edge type Revolving arm
Optional emergency power supply≥3 hours
Product features:
1.Ideal cold light effects.
Using the new LED cold light source, energy saving and environmental protection and long service life up to 80,000hours or more. Temperature increase over surgeon`s head < 1℃.
LED do not engender infrared ray and ultraviolet radiation, it doesn`t have the temperature rise and tissue damage caused by halogen shadowless light, can accelerate the wound healing after surgery, and has no Radiation pollution.
LED color temperature constant, soft, very close to the natural sun light.
2.Excellent shadowless effect
Lamp with the most scientific radian,Multi point light source design, so that more fullness of the light spot,When the lamps are partially occluded, also can achieve perfect shadowless effect.
Lamp panel radius of gyration: ≥182cm, the lamp can be pulled to vertical floor, convenient to any angle illumination.
3.Excellent deep lighting
4.Advanced control system
The use of liquid crystal display button control, to meet the needs of the medical staff of different patients with the brightness of the operation.
It offers illuminance memory function.
5.Universal suspension system
Rotating arm, a new type of alloy material is made of eight edge type.
Balanced system using imported arm module, more than 5 group universal joints, every cantilever must has more than 3 joints which can be rotated in 360°, The structure is light, easy to manipulate, accurate positioning, can provide the maximum range of regulation.
The equipped with fatigue correcting unit and fix position hand handle device, easy to fix position after long time use.
6.Modern laminar lamp
The thickest part of lamp-chimney is not more than 10cm.
The lamp-chimney is made of ABS, The handle on the central of lamp can be detachable, can take high temperature (≤ 134°C) sterilization treatment, easily adjust, flexible fixed.
Mobile Type LED Operating Light,Mobile Operating Light,Mobile LED Surgical Light,Movable LED Operating Lamp
Shandong qufu healthyou Medical Technology co.,Ltd , https://www.kangerjian-medical.com