1. Product Introduction
The screw torque test device is designed and manufactured according to the test device specified in the national standard "Screw Torque Test".
The screw torque test device must be used in conjunction with the indicator torque wrench. When the screw to be measured is placed on the base of the screw torque test device with the clamp attached to the screw, and is connected with the rotating shaft of the beam that can move up and down with a suitable cutter head, it is positioned and fixed. At this time, the required test can be performed on the screw by rotating the beam shaft with a meter-indicated torque wrench.
2. Model and specifications
SAD1-GNL-â… is suitable for M3, M4, M5, M6, M8 screws
3. Completeness
GNL --- I type can be equipped with GNBB-2; GNBB-5; GNBB-10; GNBB-50 instrument indicator torque wrench.
Weihai Tong Park Arts & Crafts Co.,Ltd , https://www.whtongpark.com