Cleaning: Clean the surface with a cloth or brush and cold water. Manufacturers may recommend leather care and preservation methods. Shake sand and dirt out of the shoes. If possible, remove the shoe's substrate when cleaning.
Bleaching: Do not bleach.
Dry: Naturally dry at moderate temperatures. Avoid direct heat sources. Convection shoe dryers work best.
Decontamination: Follow the manufacturer's instructions.
How to clean matte leather GORE-TEX shoes?
When the shoe is dry, brush away the floating soil and treat it with a water extraction agent. Do not use shoe polish or shoe polish. They will weaken the shoe's breathability.
How to clean non-leather GORE-TEX shoes?
Cold water wash, dry naturally. After drying, remove the water treatment agent. Do not use shoe polish or shoe polish. They will weaken the shoe's breathability.
Hiking shoes are made of leather because of the comfort, shaping, natural waterproofing and breathability of leather. The less water absorbed by the leather, the longer life and better comfort. Once wet, the leather stretches, weakens, shrinks and breaks when dried. Here are some simple footwear care tips.
clean. The first step in footwear care is to clean it often. Dirt particles will enter the leather fiber, causing the fiber to wear and break. Rinse the soil with clean water after use. NIKWAX Footwear Cleaning Gel and a nylon brush remove grease, excess wax, and stubborn dirt that cannot be washed off with clean water. After use, clean the inside of the shoe with a damp cloth. The salt in the sweat will quickly enter the lining, damage the leather and make the leather dry and crack.
Restore water withdrawal. Pulling water not only keeps the shoe dry, but also makes the shoe cleaner and keeps the leather soft to enhance durability. After cleaning the shoes, perform NIKWAX water extraction treatment, paying special attention to the places where pins and metal inserts penetrate the leather. If necessary, and after intense use, do one more treatment. It is best to dry the shoes for 24 hours before the next wear.
dry. First remove the shoelace and insole, and slowly dry the shoe at room temperature. Do not expose the shoe to direct heat. High temperatures can cause irreparable damage to the leather and are harmful to internal adhesives. In order to dry shoes filled with water and water, we recommend filling the shoes with newspapers. Remove the wet newspaper and put in a dry newspaper until the shoe is dry.
NIKWAX footwear care products are recommended by the following footwear brands: Alico, Adidas, Asolo, Burton, Fabiano, Hi-Tec, K-2, Merrell, Morrow, Nike, One Sport, Raichle, Rockport, Salomon, Scarpa, Sympatex, Tecnica, Timberland, Trukke, WL Gore.
Product instructions
NIKWAX FOOTWEAR CLEANING GEL .
1. Rinse the upper with clean water to remove surface dirt and make the uppers wet.
2. Rub the upper that needs to be cleaned with a sponge full of paint.
3. Scrub the upper thoroughly with a hard nylon brush and wash it with clean water.
NIKWAX NUBUCK & SUEDE WATERPROOFING
1. Brush away dirt and wash with running water (use Nikwax Footwear Cleaning Gel for optimal cleaning results).
2. Spread the coating evenly on the clean, damp upper.
3, place for 3 minutes, then wipe off excess paint.
4, to achieve the best results, repeat the above procedure 1-3 times. Place the shoe rack thoroughly dry.
Plate Paste Machine,Plate Forming Machine,Flexographic Printing Machine
Hengjin Printing Machinery Co., Ltd. , http://www.dgprintingmachine.com