In addition to the need to select suitable lubricants for the maintenance and repair of printing machinery, other auxiliary chemical materials such as detergents and rust inhibitors will also indirectly affect the performance of mechanical operations and the quality of printed products. Due to the wide variety of cleaning and maintenance materials, they cannot be introduced in a short space. Therefore, we can only promote the general focus. For other details, please contact each material supplier.
Ink roller cleaner
Cleaning agents that are often found in the printing process, such as "washing water" and "watering up", seem to have little to do with the maintenance of printing machinery. However, high-performance cleaners can reduce the time spent in the printing process, just like the purpose of maintaining machinery, "reduce downtime, increase production." Therefore, in addition to improving the ink transfer performance, the use of a high-performance ink roller cleaner can improve the printing quality, reduce the time consumed for removing the ink, and increase the production efficiency. Although the ink roller on the printing machine needs to be replaced periodically to maintain good printing effect, if a better quality cleaner is used, the ink roller replacement time can be prolonged, the maintenance cost can be saved, and the cost of the "overturned" ink roller can be reduced.
After cleaning agent
In general, manufacturers may only pay attention to the quality of printed products, and it seems that they do not pay much attention to the clean tide of the impression cylinder (the back pack). Their general mode of operation is that after a day's work, some simple treatment is considered sufficient. However, the common solid stains in the back pack are not only inks, but there may also be some “stains†caused by the chemicals used in the mixed printing process of the paper particles. These "stains" that exist in the back pack, in addition to reducing the smoothness of the impression cylinder, can also cause problems that affect the printing effect such as "dragging" or "uneven pressure" during the printing process. Therefore, the use of high-performance post-package cleaners can greatly improve the quality of printed products!
Tubing and oil cleaners
When the general manufacturer replaces the lubricating oil, only the circulating oil of the printing machine is discharged, and the new oil is directly injected into the printing machine. This practice cannot bring the new oil to the best effect. Because oil has been used for a long time, some changes have taken place in the oil. Harmful elements such as acidic and oxidizing substances are present in the old oil (as for traditional washing methods, such as wind pressure and solvent cleaning, etc., it will take quite a while). If some oil cleaner with cleaning function can be added before replacing the old engine oil, the harmful substances in the pipeline can be neutralized and dissolved. When the new lubricant is added to the printing press, the chance of the tubing being “blocked†will be reduced. To extend the service life of the machinery.
Anti-rust and lubricating chemical products
Most of the printing machinery is made of high-quality alloy steel, but due to too many parts of the machine. The situation of metal oxidation is also sometimes heard. Although most of the printing plants use air-conditioning systems to control the temperature in the rooms, the air-conditioning equipment in the plant will also be shut down during the holidays and long holidays, so some parts may be born. The most common are the non-electrical chromium layers of metal on the cutter table and the press. Therefore, rust prevention is also one of the items that cannot be ignored in the printing industry. The general rust-proof lubricants sold on the market may be formulated only for the lubrication of parts, so the rust-proof effects are generally not able to meet the requirements of customers. The use of lubricants with high permeabilities and longer rust-proof periods will allow better protection of machinery and reduce the number of mechanical damages.
To sum up, manufacturers not only choose appropriate maintenance materials, but also need to screen suitable suppliers of water materials to make long-term production cooperation. With the passage of time and the fiercely competitive business environment, many material suppliers that are financially and empirically inadequate have been eliminated one by one. In the end, there are only some suppliers who have long-term supply of good products and services. They can stand up to the pressure of ruthless giant ships.
The author's suggestions on the dimensions of the printing machinery maintenance products in the past two periods and the current period are purely personal understanding and understanding of the printing machinery. I hope that the advanced colleagues or senior seniors will give more advice and make a contribution to the development and progress of the printing industry.
Ink roller cleaner
Cleaning agents that are often found in the printing process, such as "washing water" and "watering up", seem to have little to do with the maintenance of printing machinery. However, high-performance cleaners can reduce the time spent in the printing process, just like the purpose of maintaining machinery, "reduce downtime, increase production." Therefore, in addition to improving the ink transfer performance, the use of a high-performance ink roller cleaner can improve the printing quality, reduce the time consumed for removing the ink, and increase the production efficiency. Although the ink roller on the printing machine needs to be replaced periodically to maintain good printing effect, if a better quality cleaner is used, the ink roller replacement time can be prolonged, the maintenance cost can be saved, and the cost of the "overturned" ink roller can be reduced.
After cleaning agent
In general, manufacturers may only pay attention to the quality of printed products, and it seems that they do not pay much attention to the clean tide of the impression cylinder (the back pack). Their general mode of operation is that after a day's work, some simple treatment is considered sufficient. However, the common solid stains in the back pack are not only inks, but there may also be some “stains†caused by the chemicals used in the mixed printing process of the paper particles. These "stains" that exist in the back pack, in addition to reducing the smoothness of the impression cylinder, can also cause problems that affect the printing effect such as "dragging" or "uneven pressure" during the printing process. Therefore, the use of high-performance post-package cleaners can greatly improve the quality of printed products!
Tubing and oil cleaners
When the general manufacturer replaces the lubricating oil, only the circulating oil of the printing machine is discharged, and the new oil is directly injected into the printing machine. This practice cannot bring the new oil to the best effect. Because oil has been used for a long time, some changes have taken place in the oil. Harmful elements such as acidic and oxidizing substances are present in the old oil (as for traditional washing methods, such as wind pressure and solvent cleaning, etc., it will take quite a while). If some oil cleaner with cleaning function can be added before replacing the old engine oil, the harmful substances in the pipeline can be neutralized and dissolved. When the new lubricant is added to the printing press, the chance of the tubing being “blocked†will be reduced. To extend the service life of the machinery.
Anti-rust and lubricating chemical products
Most of the printing machinery is made of high-quality alloy steel, but due to too many parts of the machine. The situation of metal oxidation is also sometimes heard. Although most of the printing plants use air-conditioning systems to control the temperature in the rooms, the air-conditioning equipment in the plant will also be shut down during the holidays and long holidays, so some parts may be born. The most common are the non-electrical chromium layers of metal on the cutter table and the press. Therefore, rust prevention is also one of the items that cannot be ignored in the printing industry. The general rust-proof lubricants sold on the market may be formulated only for the lubrication of parts, so the rust-proof effects are generally not able to meet the requirements of customers. The use of lubricants with high permeabilities and longer rust-proof periods will allow better protection of machinery and reduce the number of mechanical damages.
To sum up, manufacturers not only choose appropriate maintenance materials, but also need to screen suitable suppliers of water materials to make long-term production cooperation. With the passage of time and the fiercely competitive business environment, many material suppliers that are financially and empirically inadequate have been eliminated one by one. In the end, there are only some suppliers who have long-term supply of good products and services. They can stand up to the pressure of ruthless giant ships.
The author's suggestions on the dimensions of the printing machinery maintenance products in the past two periods and the current period are purely personal understanding and understanding of the printing machinery. I hope that the advanced colleagues or senior seniors will give more advice and make a contribution to the development and progress of the printing industry.
Best Non Stick Wok,Steel Wok With Lid,Stainless Steel Wok,304 Stainless Steel Wok
SUZHOU JIAYI KITCHENWARE TECHNOLOGY CO.,LTD , https://www.jiayikitchenwares.com