Method for identifying raw and auxiliary materials in green printing

The role of green auxiliary materials in the green printing process is crucial. Printing companies are paying more and more attention to green raw and auxiliary materials. Faced with market demand, more and more material suppliers are committed to the supply of green and environmentally friendly materials. Propaganda, a variety of new products, new technologies emerge one after another, in order to distinguish from ordinary raw and auxiliary materials, most printing companies as users can not only listen to the unilateral propaganda of suppliers when choosing green raw and auxiliary materials, but have their own Judging criteria.

According to the results of the “Second China Green Printing Enterprise Survey” organized by China Printing Technology Association and China Printing Magazine, when determining green raw and auxiliary materials, among the 326 companies participating in the survey, 304 companies chose to meet the relevant standards. The test report, accounting for more than 93%; 281 companies chose the "certificate issued by the authority", accounting for about 86%. The high proportion of these two criteria indicates that printing companies are more inclined to rely on third-party certification when judging green materials. In addition, 95 companies have chosen the “Product Specification”, which ranks third, accounting for 29%. The same as the first two categories of high-ratio selection, the "product specification" as a carrier to describe the nature and function of the product, also has the objective characteristics. “Professional Publications Report” and “Peer Recommendation” as one of the options have obvious subjective tendencies, with 26 and 45 companies choosing, accounting for a small proportion. Overall, the choices of most printing companies indicate that they are more focused on objective, fair and scientific recognition when judging green raw and auxiliary materials.

Article source address: http://

Aluminum Decking

GD Aluminium`s revolutionary aluminum locking seal and continuous gutter technology provide a gap-less floor for waterproof decking and roof covering with single-layer construction. Aluminum decking is watertight underneath with no additional plywood or membranes required. The deck boards lock together under pressure to form a water-resistant joint. In the unlikely event that any moisture gets past the pressure lock, there is an integral gutter in each deck board to carry it away.

Aluminum Decking,Fireproof Decking,Outdoor Decking Floor,Floor Decking

FOSHAN GD ALUMINUM CO LTD , https://www.gd-fence.com