[Chinese] production network wardrobe closet is a lot of material that can be selected, such as wood panels, composite panels, plastic panels, made wardrobes are relatively good. Finger joint plates are also common plates. Some people think that finger joint plates are not suitable for wardrobes. Is the finger joint plate a wardrobe? What are the characteristics of the finger joint board? Let's take a look at the introduction of Xiaobian.
Is the finger joint board a wardrobe?
Is the finger joint board a wardrobe? Is it suitable for the wardrobe?
It is ok to make a fingerboard to make a wardrobe. The finger joint plate is solid wood, that is, a piece of solid wood piece that has been processed by deep processing like a "finger head". Since the wooden board has a jagged interface, similar to the cross-docking of two fingers, it is called a finger joint plate. Some are called bare boards. Easy to process, can be cut, drilled, sawed and shaped.
Since the raw wood strips are cross-coupled, such a combined structure has a certain bonding force, but since it is no longer necessary to stick the three-centre board up and down, the glue used is extremely small and relatively environmentally friendly. It is because of the above reasons, this kind of board is a big wardrobe. What is bigger, the cabinet is OK, but the door, the small drawer, the large shelf, or something smaller, it is worse, it is easy to change. Cracking.
Finger-joining board to make a wardrobe?
The use of the finger joint board is the same as that of the wood board. The finger joint board uses much less glue than the wood board in the production process. Therefore, it is a more environmentally friendly board than the wood board. More and more people have begun to choose it. Finger joints to replace wood board. The common thickness of finger joint plates is 12mm, 14mm, 16mm, 20mm, and the thickest can reach 36mm. There is no need to paste the splint on the fingerboard, and the amount of glue is greatly reduced. The glue used for the finger joint board is generally milk white glue, that is, an aqueous solution of polyvinyl acetate. It is a flux used for water. It is non-toxic and tasteless. Even if it is decomposed, it is acetic acid and is not toxic.
The finger joint board is also divided into two sections: no knots and no knots. There are knots in the blink of an eye, no knots in the blink of an eye, and more beautiful. Some installers directly use the fingerboard to make furniture, and the surface does not need to be attached to the panel. There is style and money.
The problem of the finger-joining board being a wardrobe is that the above has been specifically analyzed. When making a wardrobe, everyone can choose the right board according to their own preferences and family needs. There are many types of plates on the market, as long as it is suitable for your own plate making furniture is good.
Buffet Display Series,Buffet Display Series Docking Station,Buffet Tableware,Commercial Juice Dispenser Machine
Jiangmen Junerte Stainless Steel Kitchenware Co.,Ltd , https://www.jmjetkitchenware.com