[ Chinese wardrobe net ] There are many brands and styles of wardrobes on the market now, but there are still many people who will choose to let the carpenter master to make the wardrobe. The wardrobe that comes out will make you more satisfied, the price is more affordable, then the woodworking What is the process of making a wardrobe? The following small series will give you a detailed introduction to the process of making wood wardrobes. Let's take a look.
Inspection material
Qualified materials can be used and the woodworker can choose the ingredients. Veneer: The trim panel of the cabinet door is applied with a material with small color difference, and the board surface is inspected for damage and flaws; the closing line: the color is uniform and there are no obvious defects.
Cut off
First combine the frame of the base layer and then check the accuracy: verticality ≤ 2 mm, level ≤ 1 mm, warpage ≤ 2 mm. In order to prevent the uneven force and deformation of the door, the double-layer is used when making the woodboard in the cabinet.
Check frame size
Make sure the main dimensions and drawings are correct. The back of the cabinet is reinforced with nine PCT plates and secured with code pins or steel nails.
Solid wood veneer in the cabinet
After it is cleaned and polished, it is pasted with white latex or all-purpose adhesive, and then fixed with a small amount of nails. Note that the seams should be even and tidy.
Door making
Choose the wood board to use the strip or the entire board to cross the slot. The front and back veneer panels should be selected from the entire panel veneer. The wood grain should be straight and beautiful; clean all the faces of the door leaf and check the geometrical dimensions. The diagonal and four perimeter errors should be ≤ 4 mm; the same size is put together .
After the door is finished
It needs to be placed on a flat surface and pressed with heavy objects, or pressed with a wooden side for not less than three days; after the pick-up line is selected and pushed, the seams should be straight and clean, and there is no obvious at a distance of 0.5 meters. seam. The parquet decoration of doors and windows should be based on the drawings, the dimensions should be accurate, and the joints should be uniform and beautiful.
Height of the drawer
Between 120mm and 200mm, the wood board or high-quality double-panel is used to make the frame, the floor is made of nine-thick board and the three-layer board; the horizontal wood board incision should be closed with oil or solid wood strip.
The door fans are correctly installed in the order in which they were made.
The wood grain is straight and beautiful, the geometrical dimensions are correct, and the gap size is 3 to 4 mm; for the cabinet and the cabinet cap, it should be 5 to 10 mm beyond the closed door.
Hardware should use high quality
The installation position should be correct, fixed and stable, and environmental protection; the ball of the big door should be placed on the top, or installed on the top and bottom, and the small door fan can be placed underneath; the handle of the large door should be installed uniformly, and the ground in the lower door is 1100 to 1200. In millimeters, wipe off the pencil marks after finishing.
The same plane door
There must be no obvious chromatic aberration. When the length of the door exceeds 1600 mm, three hinges must be installed; the hinges should be adjusted to prohibit the opening, and the opening should be flexible.
The above is for everyone to introduce the process of making wardrobes. Now everyone should have some understanding. The process of making wardrobes is still cumbersome. Every step needs to be cautious, so that the wardrobe can be better. Today is small. I will introduce it to you here, I hope that the content introduced above can bring you some help.
Illuminated Earth Globe,Levitating Illuminated Globe,Wood Stand Illuminated Globe,Light Up Globe With Constellations
Ningbo Holly Arts & Crafts Co.,Ltd. , https://www.china-globes.com