Athletic masters talk about drift is the essence

Adjusting and drifting refers to setting the balance point where the float and the water surface intersect by adding the weight of the lead sinker in the line group. Due to the different fishing concepts of anglers and different interpretations of floats, there are many ways to adjust and float, and each has its own reasoning. It is difficult to say which method is right and which method is wrong.

However, when the fish species in different conditions of water fishing or fishing are not the same, if the habituation and floatation methods they are accustomed to use do not work well, the best solution will be timely. So today Xiaobian has compiled the adjustment methods of the 19 elite fishing professionals. .

1, with bait adjustment drift

When adjusting the float, double-hook hanging bait, the length of the water line is controlled in the bait ball does not touch the bottom, double bait suspension. Double bait suspended in water, its weight has been balanced by the floating buoyancy, zero weight, fluttering in the water. When the fish swims near the bait, the sucking and spitting water flow can drive the bait to move and cause the float to displace. People who drift in this way are, ideologically speaking, pursuing absolute dexterity and always hope to capture it in the first action of the fish. However, over-sensitivity also brings a certain number of side effects. The false signal of floating floats increases obviously. Floating floats will make you confused and confused.

Although the bait drifting will increase the number of false floats, it is not a lack of countermeasures. For example, to hang a double bait to adjust a head, you can catch two heads, catch three eyes, and even can catch five heads, catch six heads, as long as the floats have a signal, bold fishing bluntly. For fishermen, they are not afraid of floats and they are afraid of floating.

2, without bait adjustment drift

Without bait adjustment drift can also be said to be empty hook float. When the float is adjusted, the double hook is not hung, other places are the same as the bait adjustable float. The guiding ideology of this drift is to ignore the bait weight. At least one bait ball is at the bottom when fishing. This method of drifting is commonly used by amateur fishing enthusiasts. Its advantages are the dull coexistence, both offensive and defensive, and have a certain role in dealing with fish. Of course, this method of drifting is only invincible when squid is caught in a competitive fish pond. In the natural waters, catching other fish species is a victory or defeat, and there is no absolute advantage. Whether it is with bait adjustment drift, or without bait adjustment drift, must be carried out under the premise of the double hook does not touch the bottom, the hook is bottomed out, out of the float is not accurate, beginners must pay special attention at this point.

3, single hook adjustment drift

Cut the bottom hook before adjusting the float, leaving only one hook. People who like to use this method to adjust drifting, emphasize that when fishing, it is necessary to have one hook lying on the bottom of the water, and the other hook should touch the bottom, and it is not necessary to circumvent the brain between fishing. This method is simple and practical, and it is adopted by most middle-aged and old people.

For example, if you are accustomed to fishing for trinoculars, then adjust the single hook half-height to the trinocular, ignore the weight of one of the hooks, and adjust it to replace the same strand. During the fishing, the float floats out of the water. At this time, the bottom hook is undercover and the upper hook is bottomed out.

4, real fishing status adjustment drift

The entire process of floatation must be completed under actual fishing conditions.

(1) Adjust the drift within the fishing spot after determining the fishing spot;

(2) Drift with the set of lines to be used;

(3) When the big line enters the water during the actual fishing, the large line will enter the water when the float is adjusted. When you are fishing, you have to carry a raccoon fishing line. When the line is not in the water, do not enter the water when you float.

(4) Be sure to adjust the drift after the float and the line set have sufficient draught (after immersing in water for half an hour). Otherwise, for a high-sensitivity float, there may be a gap of one goal or two.

5, half-water drift

The double hooks must be in a suspended state when the float is adjusted. It does not mean that the waterline is half the water depth. For example, to float at a depth of two meters does not allow you to use a one-meter-long waterline to adjust the drift. It is really such a drift that may not be correct. Because when you drift, the one meter long waterline is not counted within the counterweight. It may differ by more than one target for a highly sensitive float.

6, coarse adjustment

Refers to adjusting roughly before floats are floated, then throwing and digging, dipping and foaming, and then float after half an hour; because the floats and fishing lines are all microporous, they will suck after entering the water. A certain amount of water, this coarse adjustment method is to let the dry float, trunk fully absorbed and then fine-tuned to ensure accurate adjustment and drift.

7, fine-tuning

Fine-tuning is generally after the float, the actual float found in the floating language is not very accurate, and add or subtract a very small amount of lead or a small amount of floating floats up and down. For example, when you find that there is a signal in the float that the fish can not be fished, or when the fish is often caught on the bottom, you can adjust the lead weight without moving the float. The role of fine-tuning. You can also not move the float, just add a little lead to the lead sinker, so that the fishing head moves up a little; if you start with a five-fishing three, plus a small lead skin into a five-fishing two head and a half. These methods are all fine-tuning.

8, adjust the spirit

Refers to the high point of the visual target when the floating point is adjusted to meet the water surface. For example, tune one tune than tune two spirits, adjust tune two to three tune. But this kind of spirit is conditional, not absolute, and it changes with conditions.

For example, I am adjusting three eyes, and the hanging bait is just enough to sink the float to a head. At this time, the weight of the bait in the water is zero. If you change to a single head, and the double bait is the same weight as the above, then the three tunes of the tune at this time are more theoretically static than the tune.

Because of this three-fishing adjustment, the double bait is balanced by its floating buoyancy due to its own weight. When the fish sucks gently, it can suck the bait.

When fishing for one time, the weight of double bait on the bottom of the water in addition to the buoyancy of the water on the bait can reduce the weight of a small part of the bait, the remaining weight is present, the fish come to eat, only if its suction is greater than the weight shown by the bait, The bait will be sucked into the fish inlet. This is a tune than adjusting tune. If the double bait weight is still two heads, it is now changed to adjust the four eyes to catch two heads. Compared with the above adjustment of the three catches, the double bait weights of the two methods are all zero, and the result is that the adjustment of the three catches is one to four. Fishing two essential spirits. Because of the four-fishing two, the remaining buoyancy of the float exposed to the water is greater than the remaining buoyancy of the three-fishing one. Moreover, the diameter of the second target may be thicker than the first target, and if calculated according to the same length, the second target volume is larger than the first target. When the fish uses the same force to suck the bait, the displacement and displacement speed of the three-fishing float will be greater than the four-fishing float.

From this point of view, the smaller the number of floats is (the lower the exposed surface is), the more sensitive it is, and the slower it is.

9, leveling water

Refer to the float's balance point at the top of the target, so that it is flush with the water surface. Leveling water is two types: empty hook leveling water and hanging bait leveling water. If they are all fishing, bait leveling water is better than empty hook leveling water, and the truth is the same as that in Article 9.

10, heading

This is the equilibrium point where the float and the water surface set by adding or subtracting the lead skin mentioned above are intersected. If you adjust the backsight to expose the water to the third eye, then you are adjusting the three eyes. As the mark reveals the water to the fourth goal, then you adjust the four eyes.

11, fishing head

It is the number of floats that float on the surface during actual fishing. Setting the fishing target and fishing in the adjustment of the fishing target are based on the purpose of adjusting the float to further adjust the sensitivity.

The principle of the fishing line adjustment is that the fishing head is lower than the heading for the spirit, the limit is the double bait from the bottom (like adjusting the three fishing one); the fishing head is more blunt than the heading, blunt to the lead falling bottom (like the tone of the second fishing game root). A few tunes for a few fishes are based on this tune. We need to master the principle of adjustment of a float in fishing: on the basis of sighting, the sight is corrected. If the setting is wrong, the effect of adjusting the fishing target may not be ideal, because on an incorrect basis, it is impossible to correct the good effect.

12, float balance point

It is a float fishing target. When a float floats the weight of the online group and stands still in the water, the line at which the float's indication intersects the horizontal plane is the equilibrium point of the float at that time. At this point, the buoyancy generated by the float in the water is equal to that formed by the line group, and it is in a state of two-way force.

Some people say that I use a large plumb bob float (meaning that the gravity of lead sinking is significantly greater than the floating flotation force). How can I balance it? In fact, the part of the gravity that floats out of the lead after the fall of the plummet is taken up by the ground. Therefore, as long as the length of the water line is adjusted, the floating surface that is exposed to the water is also in equilibrium.

The balance point of the float, its characteristic is that any point of the mark can become the equilibrium point, but will change with the weight change of the line group. Adding or subtracting the lead weight, lengthening or shortening the length of the waterline, replacing hooks of different weights, space beans, inserting floating seats, lead sheet seats, and 8-character rings will cause changes in the balance point of the float.

In particular, when suspending lure fishing, when the bait dissolves and disengages, the highly sensitive float floats upward. This is where the original balance point was broken and the float was seeking a new balance point. When the float floats up to a certain position, the new balance is generated.

13, the center of gravity float

When the float floats vertically in the water, gradually subtracting the weight, the float will gradually rise due to the buoyancy of the water, and when it rises to a certain point, it will tend to tilt, and the point where the drift body crosses the water surface is The center of gravity of the float. The floater with the center of gravity on the point of view has good stability in the water, strong wind resistance, and more accurate and timely signal transmission.

14, full buoyancy point

The top of the float indicator reflects the point of maximum buoyancy of the float. The full buoyancy point is also the point where the maximum weight of the float is reflected. In actual fishing, this point is also the point where the floating buoyancy of the float is zero.

15, remaining buoyancy

When the float is in equilibrium in water and stands still, the part of the indicator exposed on the surface of the water is called residual buoyancy. The more eyes that are exposed on the surface of the water, the greater the remaining buoyancy, and vice versa.

16, remaining buoyancy is zero

When the float floats under the weight, the top of the indicator is also immersed in water. When the float is in suspension, the remaining buoyancy of the float is zero. When the floating buoyancy of the float is zero, it is also the full buoyancy of the float. The floating float in suspension state, although it is in the most sensitive state, does not have much practical significance, and there is no need to deliberately pursue the remaining buoyancy to zero in order to increase the sensitivity of the float. Because the actual role of the float and the bluntness in fishing is based on the different fish conditions and the changes that occur at any time, the positive and negative conversions are carried out at every moment, and the floater is not the better.

17, drifting their own language

When the float floats into the water, it is in equilibrium. In this period, there are six kinds of self-language, such as turning, standing, pausing, sinking, rebounding, and positioning. Each of these six languages ​​has its own specific laws. If there are fish to eat bait between these, it will inevitably break the specific laws of these six languages.

18, floating fish language

The signals produced by the floats as a result of fish bait are fish language. The fish language that appears before the float is positioned is sometimes very inconspicuous and difficult to grasp. Only when you know the floater's own language well can you distinguish the difference.

19, special situation adjustment method

The so-called special circumstances refer to abnormal weather conditions, lack of oxygen in the water, abnormal fish conditions, etc. Once these conditions occur, the use of “Four-fishing II” may not catch fish. This requires that we must rely on time, place, and cause of fish. Adjust measures and take corresponding measures.

Taiwanese fishing friends summarized the adjustments and drifts under special circumstances into a few words, namely "adjustment of sensitivity, sensitivity to fishing, sensitive adjustment, dullness of fishing", "adjustment of bluntness, sensitivity to fishing", "adjustment of bluntness, slowness of fishing." The use of the quadruple-eye fishing binocular as a center line has room for flexibility in the upward adjustment and ease of calculation. Generally speaking, the adjustment of four orders or more is called dullness. Fishing above the two heads is called dull fishing, fishing under the two heads or flat water is called fishing sensitive.

(1) Sensitive and sensitive. When fishing, due to the influence of climate and water quality, the fish’s appetite is not good, the action is stupid, and the swimming speed is slow. There is no apparent reaction to floats, and the bait has been eaten by fish. This situation mostly occurs in hot summer days. Low air pressure, lack of oxygen in the water, or cold winter, when the fish eat less and less, lose energy, and have a small mouth opening, this time, the “Four-fishing II” should be changed to “Tune-sensitive, fish-sensitive”, that is, tune into five , six heads, fishing a head, a head or a half or flat water. The method of adjusting the drift is to use a small pair of scissors to cut off the lead piece bit by bit until the double hooked bait reveals a head, a half head or a flat water. At this time, a hook rubs the bottom and a hook is slightly suspended in the water. The entire fishing group is in a highly sensitive state. under. The fish will react immediately as soon as the bait floats.

(2) Sensitive, slow fishing. Under what circumstances is "sensitive and slow to catch"? Such as fishing in artificial fish ponds, due to many people fishing, the fish was repeatedly fishing, very smooth, eating bait is very careful not to swallow the bait, but to take a variety of test methods, such as light mouth, a little strange immediately Or, first touch the bait to test, be sure that there is no danger, then cautiously suck the bait into the mouth, at this time the reaction of drift is very slight, drift reaction only half or one-third of the eye, it is difficult to detect. When the fisherman has not seen the movement, the bait has been eaten. In this case, the normal adjustment of the four fishing should be changed to five fishing four or five, six fishing five or six heads. During floatation, the surface of the water floats to reveal five or six heads, while the double-hook bait floats at the bottom of the float to reveal five or six heads. After using this method of adjustment, the method of fishing should also be adapted to it. Because of the high level of fishing, the method of introduction can be used. After the bait is thrown into a straight line to enter the water, the arm is extended beyond the rod frame and the float is raised. , The main line into the water, do not pull back, wait for the float to five or six heads, slowly drift back to about 10 cm, and then pull back once. For example, if you catch five eyes, you will have two eyes when you pull back, and five eyes when you put them back. Often, you will have fish bite hooks when you pull them. If you find that you are floating into the water, you can get fish immediately and you can use this kind of fishing method. Artificial fish pond fishing is very effective, but pay attention to the bait to be slightly harder and sticky to prevent fragmentation during the pull process.

(3) Adjust the blunt and sensitive fish. In the artificial fish pond, there are fish in the nest and the swimming is normal, but the biting hook is not normal, the bait movement is small, it is difficult to have a setback and the next signal, there is no dynamic and static bait has been eaten, the solution is to adjust Two or three heads catch one or half heads until the water level, as long as there is a slight abnormality or sinking in the floats, the fish can be fished immediately and sometimes caught in the fish's lips.

(4) Slow and blunt fishing. This is also a very special adjustment method. In the competitive artificial fish ponds where fishing is repeated, the fish are alert to dullness and dullness. For example, if the fish is not fished with the blunt and sensitive method, you may consider adjusting the bluntness and dullness of fishing. For example, adjust the three catches three times, adjust the second catch three or adjust the three catches four, or even adjust one or two heads, catch four. Five orders.

The above four methods of floatation are necessary for beginner typices. Of course, after Taiwan’s introduction of Da Lu (monitoring), there has been a new understanding and improvement in floatation, which can only be explored and innovative in our usual practice and competition.