Decorate plank how to choose
First, look at environmental protection is not environmentally friendly
According to the requirements of China's "Release Limitation of Formaldehyde in Wood-based Panels and Their Products for Interior Decoration Materials", the amount of formaldehyde released directly into indoor building materials must be less than or equal to 1.5 mg per liter , if the formaldehyde emission is less than or equal to 5 per liter. In milligrams, it must be treated after finishing to be used indoors. The amount of formaldehyde released exceeds 5 mg per liter, which is substandard. Bringing unqualified wood home is like adding a gas generator to a new home. To buy building materials, you must first look at environmental protection and not environmental protection.
For example, E0 grade plate, “ E0 †is the mark of formaldehyde release limit grade, it refers to the value mark of less than 0.5 mg of formaldehyde per liter (E00.5mg/l) , and the national standard E0 is the formaldehyde in China's wood-based panel and its products. Release the highest standard of the limit.
Second, the quality of the veneer
Some of the plates look good on the surface, but with the nails, you can see the obvious scratches - these furniture use sapphire paper, gorgeous paper and other plates, the wear resistance is poor. In the market, better sheet brands will use environmentally friendly melamine veneers with thicker immersion paint and high temperature and high pressure treatment, with high surface strength, abrasion resistance and scratch resistance.
The whole series of eco-boards of fine artisans adopts famous brand decorative papers such as Jiajiajia, which has high strength, good uniformity and strong absorption to ensure good immersion of the impregnating agent and waterproof. Imported polyamide resin ink printing, good gloss and wear resistance, anti-UV interior decoration enjoys a lifetime without fading.
Third, the board edge to see the work
The sheet material without the edge seal is easy to absorb the moisture in the air, causing the sheet to expand, which causes the furniture to be deformed and affects the service life. Professional brand merchants use precision panel saws to cut sheets, and there is no chipping around the sheets. After the edges are sealed, the moisture in the air is effectively prevented from intruding into the interior of the board.
Fourth, see if the wood has been processed and the moisture content
When the moisture content of the wood is higher than the equilibrium moisture content of the environment, the wood will shrink and shrink, and vice versa. The main cause of cracking and deformation of wood is that the moisture content is too high or too low. Qualified wood needs to go through the factory's high temperature cooking and drying procedures to achieve local moisture levels. Therefore, the moisture content of wood is particularly important.
The wood craftsman's solid wood E0 ecological board, the unique degreasing and disjoining technology to modify the wood processing, the treated wood has a satisfactory adhesive performance. The bending strength is increased by 32% , the anti- cracking force is increased by 31% , cracking and warping are not caused, and the requirements for ecological board production are fully satisfied. The unique 28- layer ecological board professional A7 production process ( far more than a dozen processes of ordinary manufacturers ) , to ensure the quality of the product, has passed all the tests of the national authorities. It is unanimously called “plates that can breathe freelyâ€.
Adjustable Single Desk And Chair
Adjustable Single Desk And Chair,Desks And Chairs,School Study Chair Table,Adjustable Kid Desk And Chair
AU-PINY FURNITURE CO., LTD , https://www.jmaupiny.com