The printer is an important partner in our office. It helps us to print the documents and print the color pictures. Help us solve a lot of problems in the office. But for the operation on the surface of the printer, you may understand the operation manual. But what do you know about the correct process of using toner cartridges for powdering? Don't add toner to the toner cartridge easily. If you are not careful, it may damage the machine. Let's learn together with Xiaobian!
1. Before adding powder, it is necessary to completely remove the waste powder. The powder on the magnetic roller should be cleaned as much as possible. If the newly added powder is different from the original powder, the two will be mixed together, and it is likely that there will be bottom ash printed.
2, magnetic roller: magnetic roller has a plastic roller cover at both ends, do not break when adding powder, do not forget not to install; if not installed, the possible result is: the side of the print does not have a fish scale-like foundation . One side of the magnetic roller has a yellow ring-shaped copper wire, which is used for the grounding handle. Be careful not to bend it or press it into another shape; its poorness is likely to affect the depth of the print.
3, rubber roller: Personally think that if you have printed well, do not wipe the rubber roller when adding powder, even if it is very dirty, do not care about it, you can use the skin mouse to blow. If you add a powder, if there is a black road in the horizontal direction, and if there is more than 4 lanes on the top (the drum core is about four bad), you need to think about the rubber roller.
4, drum core: take out the drum core as far as possible from the appliance, do not touch things. We all know that the drum core is so delicate and it is very likely to be scrapped when it is not taken care of. It must be very careful.
In fact, I read the contents of the above series for everyone to sort out. Is it not that difficult? The most important thing is to be careful. However, Xiaobian wants to say that the toner cartridge is a fragile and precious part, so don't just be careful when adding powder. Usually, don't open it and check it inside. If your machine encounters any problems, it is best to ask them. To view and repair, add powder to them. If this is because of any problems with your powder, it is not easy to communicate with the after-sales.
We could make different size of packaging box and Kraft Paper Box base on your design.we aer the China Hang Tag ,Printing Label,Cardboard Boxes,Paper Bags Manufacturer and Supplier.
Kraft Paper Box
Hang Tag,Printing Label,Cardboard Boxes,Paper Bags Manufacturer and Supplier.
Xing Hua Printing Factory , https://www.xinghuaprint.com