Bungee jumping trampoline is a type of amusement equipment. What are the steps for installing a bungee jumping bed?
installation steps:
1. Center the column and select a flat floor. Place the center column vertically and do not tilt it. The lower sloping rod and the center pillar are fixed downward and connected tightly with each other. Then connect the lower sloping bar to the center fastening chain. Do not tighten it too tightly.
2. First, fasten the fastening wire rope to the heart ring on the left and right sides of the upper diagonal bar.
3. The alignment of the poles is to tilt the slanting rod to the center pillar and then the upper slant pole and the pole are connected and fastened.
4. Separate the hooks on the two lifting ropes to the left and right, and hung them in the round holes at the top of the upper slash. Connect the wire rope head outwards to the safety hook, elastic rope, and seat belt.
5. Separate the two sides, pull up the lifting rope and form a straight line with the pole. Keep the pole and the upper pole parallel to the vertical and rise upright until the upper pole and the center pillar are connected obliquely.
6. Pull up the two fastening wire ropes connecting the upper oblique tops and hang them on the steel rings at the middle ends of the adjacent lower and right sloping rods respectively, and tighten them to keep the vertical poles vertical.
7. The center of the upper slash bar is zipped on the fastening ring that is connected to the middle of the adjacent upper sloping bar. Adjust the spacing of the upper sloping bar from the hamstring screw and tighten it to keep the vertical bar vertical.
8. The electric hoist is mounted on the motor holder of the center column. Keep the wire rope limit switch of the electric hoist in the center of the center column.
9. The electric hoist wire rope head has a center hole and a hook which passes up and over the limit stop. After being removed, it is fastened by a wire rope.
10. The chicken heart ring in the lifting rope is connected with the electric hoist hook. The limit stop piece core must be adjusted to the top of the lifting wire rope. The rope limiter is automatically disconnected from the pulley when it is 5-10 cm away from the pulley.
The company's Sports Equipment Co., Ltd. warm reminder: Caring for children's healthy growth, starting from paying attention to children's safety!
The silicone water bottle is made of food grade silica gel, safe, environment-friendly, non-toxic and healthy, long service life and light weight.
You can take it anywhere with you. It's easy to use and easy to clean. Because of the material; the price of bottle won't be expensive. The money saved could be used to make your drinks even better.
Medical Grade Silicone Water Bottle,Collapsible Water Bottle,Silicone Water Bottle with Straw,Insulated Collapsible Water Bottle,Silicone Hot Water Bottle
Ningbo Auland International Co.,Ltd. , https://www.aulandbottles.com