Alternating Pressure Medical Air Bubble Mattress

alternating  pressure medical air bubble mattress are used to prevent and treat 'bedsores' or 'pressure sores'. They are also used to provide burn patients, patients with Multiple Sclerosis, Lou Gehrig's disease, etc. with comfort and relief.
 
alternating  pressure medical air bubble mattress is a replacement alternating air mattress system that is designed for patients who are at medium-high risk of developing pressure ulcers. This mattress is ideal for use within a hospital, hospice or care home environment, with an easy to use digital control system that incorporates alternating & static modes with variable pressure settings. 
 
Finermed carry a wide selection of medical air alternating pressure anti bedsore mattress to meet the needs of our patients care and budget.
 
Pressure pads are essential for those who have to spend long periods in bed or a chair and run the risk of developing pressure sores. This pad will bring welcome relief by automatically altering the pressure against the person body without the need to constantly turn them. 21 body support tubes continually change pressure and help improve circulation. Made of durable 16 -gauge vinyl, the pad is quiet, safe, portable and virtually maintenance free. Ideal for use on home beds or hospital beds. The pad includes a 110 volt A.C. 60 Hz, UL listed pump with 3-wire hospital grade cord and plug and illuminated on/off switch
 
Air pump Features:
Simple to operate
Portable & Lightweight
Low Noisy
Alternating pressure pump prevents pressure sore & provides pressure relief.
Pressure Range:40-100mmHg Adjusted by the weight of patient.
Fuse on the outside for easy to repair.
 
USE:PRESSURE PUMP FOR MATTRESS
POWER SUPPLY:230V~ -50HZ/110V-60HZ
AIR OUTPUT:5 LITER/MIN
PRESSURE:40 MMHG - 100 MMHG
CYCLE TIME:8 MIN
POWER CONSUMPTION:10W
PROTECTION:ESTERNAL FUSE F1A
SIZE:265MM X 125MM X 105(H)MM
MATERIAL:ABS
WEIGHT:ABOUT 1,4KG
 
Mattress Pad SPEC:
Material: PVC (EN-71, non toxic) from taiwan,Very soft
130 bubble cells
PVC thickness: 0.30 mm
Size: 280cm(L) x 90cm(W) x 7cm(H) with with end flaps
Weight:2.2-2.5kg
Repair kit and hose included

Primer

Primer,Anticorrosion Primer,Anticorrosion Pipe Wrap Tape Primer

PVC Insulation Tape Co., Ltd. , http://www.jnpipetape.com